Joost Smits This depends on the scope. In general I don't believe in the "best software", since there are many capable companies offering such services for many years. The software should fit your way of work and project scope. If you are interested in what Systems Navigator can do for you, you can contact me at js@systemsnavigator.com.

Best regards,
Joost Smits - Business Development Manager

2 months ago | Reply

Mohamed I have 4 tanks in Alexandria port , you can use it and I can offer you best price please let me know the products

7 days ago | Reply

Mohamed Omar , if you want to use tanks in Egypt . please let me know

7 days ago | Reply

Gajanan Bochare-Mott MacDonald Dear Mr Kamran,

We can help you, can i know the locations you are targetting? You can mail me on gajanan.bochare@mottmac.com

2 months ago | Reply

Joost Smits Hi Kamran,

We could support the due diligence study by analyzing the terminal logistics, e.g. will the terminal perform as expected at the foreseen configuration (products at the terminal, number of customers, fleet mix etc.). If this is required, please contact me at js@systemsnavigator.com

Best regards,
Joost Smits

2 months ago | Reply

Rob Luijendijk Dear Victor,

What you are querying about is really a so-called Due Diligence procedure or at least part thereof. Prior to a party buying a terminal and depending on what sort of acquisition this concerns (share transaction or asset transaction) an extensive investigation into all relevant aspects of a terminal is conducted, normally by outside experts in the different fields of expertise that come into play. Areas (high level) that need to be reviewed are, at least: Technical Operational, Environmental, Permits, Qualifications, Legal, Management, Financial, Commercial and perhaps other aspects that are specific to local circumstances. Depending on the size of a terminal and the level of detail required by the potential buyer , a full Due Diligence process may take from a few days to up to more than a week. Our mother company has extensive experience with Due Diligence processes of tank terminals.

Rob Luijendijk

2 months ago | Reply

Victor Thank you. We are looking at the Technical due diligence and will want additional information from the responsible concern. Kindly send us the relevant email add or send an email to victorohakim@gmail.com or vohakim@earthoilgroup.com

2 months ago | Reply

Mohamed Dear Sir
I would like to inform you that i have 4 tanks ready to store Gas oil , but the terminal in inside Alexandria port / Egypt
So please let me know if there any customer interested we are help 24 counties on MID sea
waiting your kind reply
Thanks
Mohamed

2 months ago | Reply

Joost Smits Dear Abady,

We often calculate this in our simulation projects. Please contact me at js@systemsnavigator.com, so we can schedule a call to discuss your project and how we can support it.

Best regards,
Joost Smits - Business Development Manager

3 months ago | Reply

Mohamed Moustafa You can find it inside Alexandria port , Egypt .

3 months ago | Reply

Joost Smits Dear Abdul,

Systems Navigator optimizes the design and operations at terminals using operation research techniques, such as simulation modeling. We have vast knowledge in working on terminal projects, see www.systemsnavigator.com for references.

Please contact me at js@systemsnavigator.com, so we can schedule a call to discuss your project and how we can support it.

Best regards,
Joost Smits - Business Development Manager

3 months ago | Reply

abdul gani Dear Joost.

Thank you for your emaul. Will contact you soon .

Thank you

2 months ago | Reply

Joseph Gonnelli NJ Deep water storage avail in three months 1.2mm bbl capacity
call 856.904.8793

3 months ago | Reply

Ilga Pauser, TankTerminals.com Dear Brad,
TankTerminals.com lists commercial storage facilities, currently operating. Would closed/converted sites be of your interest only?

5 months ago | Reply

Arifin /Malaysia Depreciation & amortisation should be around 40%-60% of TOTAL expenses(excluding financial costs).
Labour/staff cost around 15%-25%.
Insurance premium generally a function of tank terminal construction cost(EPC). May take 0.5% to 1% of EPC per annum.

For estimate of operating cost OPEX (which exclude depreciation and financial cost), USD 1 to USD 1.50 per cubic meter per month can be used as a guide. If it is 1,000,000 cbm, take say USD1-1.5million per month on OPEX.

Arifin / Malaysia

4 months ago | Reply

Joost Smits Dear Amarjit,

Please elaborate on your question. If I understand correctly you are looking for a study to determine a location for a terminal; and if you have selected the location, the size/characteristics of the terminal.

Simulation modeling is a good tool to perform such studies. Examples of such project can be found here: www.systemsnavigator.com

Best regards,
Joost

5 months ago | Reply

Marcel Sipkes Please contact marcelsipkes@msi-support.nl
Regards,
Marcel Sipkes
www.msi-support.nl
The Netherlands

5 months ago | Reply

Paresh Shah Dear Mr. Adhiraj,
To understand Bulk Liquid Storage Industry at Indian Coast, you may contact us at inquiry@portlogisticsindia.com. We can assist you with our Professional knowledge with over 30yrs experience in Industry at senior level.

100 years ago | Reply

Joost Smits Dear Adhiraj,

I have an Ernst&Young report about this. I'm guessing you work at Ernst&Young, so you should be able to receive it from some of your colleagues. If not, drop me an email: business@systemsnavigator.com

Best regards,
Joost

5 months ago | Reply

Carlos PEREIRA Hello,

I believe that one of the first aspect that you would have to establish is the level of automation that you will have on your terminals.
In general petroleum operations are much more automated than chemicals.
You might have to consider purchasing of a Management System / ERP to manage your operations and customers invoicing (except if your terminal is small and/or not very automated).
It is difficult to provide an average cost without knowing the characteristics of your terminal.

Best Regards

6 months ago | Reply

Joost Smits Dear Suhaimi,

As mentioned by Carlos, there are a lot of ICT systems at terminals. It is impossible to state an average cost, but I can give you some areas in which such systems are used:

- decision support systems
- planning and scheduling
- HSE
- Training
- ERP systems
- communications

Best regards,
Joost

5 months ago | Reply

Joe Quinn Mark Winker of Kremsmueller group, please drop me a mail for his contact details.

7 months ago | Reply

Shrikant We are from Tata COnsulting Engineers and have the required experts for Oil & Gas projects , please advise what kind of expertise do you require. You may contact on sthakker@tce.co.in.

6 months ago | Reply

View all 5 answers

Leon Hi Mike, you could try the following link. It may help you: www.port

-142921415469 seconds ago | Reply

MR Balagam Yes It is 100% possible to deliver 4M cargoes of different natures, If Delivery system of cargo is fool proof and efficient without delay time.

Thanks and have a happy new year -- T13
MR Balagam
kapabal@gmail.com

5 months ago | Reply

Rob Luijendijk Dear Mr Khalidi Mehmood, please note that TankTerminals.com is a website (and database) for tank terminal facilities. The website is not intended (and not geared towards) bringing together traders in oil products. We are, regrettably, therefore not in a position to deal with your question.

7 months ago | Reply

Rob Luijendijk Dear sir, we are interested to discuss this question with you personally. Please provide us with a telephone number and/or an e-mail address.

Regards,
Rob Luijendijk

7 months ago | Reply

SYAMSUL ANUAR ABDUL HAMID pls emel me at syamsul.softnet@gmail.com..i will give my phone number in the email..your help is really appreciated

7 months ago | Reply

Rob Luijendijk Dear sir,

The total global captive + independent tank storage capacity is estimated at 2,000 – 2,500 Mm³. Captive tank storage capacity is generaly that capacity that is managed/controlled by oil majors. The independent tank storage capacity is estimated at 20% of this total, ie 400 - 500 Mm³.

Regards,
Rob Luijendijk

7 months ago | Reply

Naeem Ansari KSA N2 gas can be used and it is ideal for fixed roof tank either empty or full (at safe level) Gasoline vapours will remain inside, N2 not only protect unnecessary vapour losses but will keep the product cool and away from explosive mixture.
Ideally, Internal Floating roof tanks are the most suitable tank for Gasoline, IFR can also be installed into fixed roof tanks.

3 months ago | Reply

Ilga Pauser, TankTerminals.com Dear Ramanathan, TankTerminals.com provides on-line access to a vast amount of information about independent, commercial tank storage facilities all over the world. Facilities of such companies as Vopak, Oiltanking, VTTI, etc., who lease their capacities to 3rd parties. Facilities of such companies as Shell and BP, who do not lease their capacities to 3rd parties, are listed in minority in the database.

-140617818476 seconds ago | Reply

Keith Sharp I am working with a title holder of fuel in rotterdam contact me at ks.sharpfinancial@gmail.com

7 months ago | Reply

Rob Luijendijk Dear Jo, there are really no (public) websites with that sort of information. There are instrutions (research bureaus, consultants) that have (inidicative) rate levels, but again, not in the public domain. Also note that crude storage (at the receiving ens, line Singapore) is largely in the hands of refineries who do not store crude for commercial purposes but for feeding the refinery. Commercial crude storage, unlike that of petroleum products or chemicals, is not frequently practiced. If not for and within a refinery complex, storage of crude is done for strategic purposes or it is done to get the crude from the well to, e.g. an export port. Crude storage is rather seen as a cost than as a source of revenue/profit.

8 months ago | Reply

Rob Luijendijk Dear Mr. John Son, please note that you can acquire, right away and online, access to the TankTerminals.com database which includes all tank terminals in Rotterdam with their respective contact details allowing you to verify whether any of the appropriate terminals can accommodate your requirement.

8 months ago | Reply

thomas Rob, your TankTerminal Database does not work, I've tried contacting two leads from your Database and no Manager nor anyone responds to those bogus Offerings. I spent 40 credits each, done wasted 80 credits total for nothing. Fake leads cost us Credits, seems like another smart scam...

-42728087215 seconds ago | Reply

View all 3 answers

Scott Greetings,

I would enjoy an opportunity to discuss your question in greater detail. I understand the terminal market and have extensive knowledge of the referenced area. Please let me know I would like to help.

8 months ago | Reply

Shahid-ul Huq Dear Sir,

We have inquiry for EPC Contract for design, supply, erection/fabrication of different capacity HFO Storage Tank, Lube Oil Storage Tank, Sludge Tank, Water Tank, etc. for one medium sized power plant.

Please consult our website www.tmel.org to understand better about our business activities

If you are capable and interested in this business then please reply immediately.

We look forward to hear from you soon.

Kind regards,

Shahid-ul Huq
COO & Director Marketing
TM Engineering Ltd.
House No. 125, Road No. 1,
Block - Ka, Pisciculture Housing Society,
Shyamoli, Mohammadpur, Dhaka-1207,
Bangladesh.
Tel: 0088-02-8141676
Fax: 0088-02-8155837
E-mail: tmel@dhaka.net
Web: www.tmel.org

-201932960702 seconds ago | Reply

Thomas Mr. Shahid,

Do you have access to Petroleum Products from Refinery? Please contact me at THOMASSBGB@GMAIL.COM or call me (909) 489-0036.

Thanks,

-18870973569 seconds ago | Reply

View all 4 answers

Allen Minitzer Not clear, please rephrase

  8 months ago via LinkedIn | Reply

Allen Minitzer What exactly are you looking for?

  8 months ago via LinkedIn | Reply

View all 7 answers

Paresh Shah Dear Ademola, We at Port Logistics India are Group of Professionals with Senior Level experience & expertise on Bulk Liquid Storage Industry. We can provide consultancy on evaluating your proposed Tank Farm purchase & also advise on due diligence process for smooth transaction on transfer of the asset. You can send your interest in our services at inquiry@portlogisticsindia.com OR contact me on Hand phone:+919820059728 OR SKYPE : Paresh_India. Thanks & Regards,

10 months ago | Reply

Shahid-ul Huq Dear Sir,

We have inquiry for EPC Contract for design, supply, erection/fabrication of different capacity HFO Storage Tank, Lube Oil Storage Tank, Sludge Tank, Water Tank, etc. for one medium sized power plant.

Please consult our website www.tmel.org to understand better about our business activities

If you are capable and interested in this business then please reply immediately.

We look forward to hear from you soon.

Kind regards,

Shahid-ul Huq
COO & Director Marketing
TM Engineering Ltd.
House No. 125, Road No. 1,
Block - Ka, Pisciculture Housing Society,
Shyamoli, Mohammadpur, Dhaka-1207,
Bangladesh.
Tel: 0088-02-8141676
Fax: 0088-02-8155837
E-mail: tmel@dhaka.net
Web: www.tmel.org

-202848109502 seconds ago | Reply

Sanjay Anand There is no thumb rule for typical power consumption in a terminal. Also sorry there is no corelation between pwer and capacity. The power consumption mainly depends on throughput or tank turns, capacity number & type of pumps, heating, blending and ancillary services. Typically 75% will be allocated to pumps and heating system.

9 months ago | Reply

Ilga Pauser, TankTerminals.com Dear Daniel, we regret to advise you that we are offhand not in a position to provide information on storage rates and as far as we know there is no publisher providing such information. It is the best to contact terminals directly for their rates and terms.
The storage rates do vary based on the product.

10 months ago | Reply

Sanjay Anand 1. For crude oil it can range from USD 3 to USD 8 per cub m per month depending on the country.
2. Not much. However yes between class 1 and II/III.

9 months ago | Reply

View all 3 answers

Sanjay Anand It could be 5% to 8% on capital depending on various factors.

9 months ago | Reply

Ilga Pauser, TankTerminals.com Dear Anuraq, there are 2 petrochemical facilities located in the port of Jubail, listed in TankTerminals.com terminal database. You may make a Registration at our website and with that you create a so-called Credit Account (with 100 free credit points) which will allow you to search our database. Once the 100 points are used up you can buy any additional number of points (€ 0.30/point) with a credit card.
We regret to advise you that TankTerminals.com does not record information about container terminals or storage companies.

-61378218001 seconds ago | Reply

Salim Bilawala There are many factor on which the investment is decided. viz. type of products you are storing, facility and services you offer. The storage tanks also will depend upon types of products, vapor recovery etc. I am currently involved in tank farm planning and construction and can help you more.

  10 months ago via LinkedIn | Reply

Mohamad Roslan Mohamad Zin Would that will inclusive other factors or deliverable that maybe overlook at?

  11 months ago via LinkedIn | Reply

Ramakrishna Jeeri Could be around removal - 2.0$ for new construct use 4.5$ + additional for environment clearance (can be estimated after physical survey of the site after clearing the property before getting new one) costs shall be validated after through verification of local taxes/logistics/permits/approvals etc.

  10 months ago via LinkedIn | Reply

View all 3 answers

Ilga Pauser, TankTerminals.com We regret to advise you that we are offhand not in a position to provide information on storage rates and as far as we know there is no publisher providing such information. The only magazine, to the best of our knowledge, that publishes generic information on rates for oil etc. in major oil hubs is the Petroleum Economist. Otherwise, it is the best to contact terminals directly for their rates and terms.

11 months ago | Reply

Ilga Pauser, TankTerminals.com Dear Kshitij, there are 3 facilities located in the port of Chennai, listed in TankTerminals.com terminal database. You may make a Registration at our website and with that you create a so-called Credit Account (with 100 free credit points) which will allow you to search our database. Once the 100 points are used up you can buy any additional number of points (€ 0.30/point) with a credit card.

11 months ago | Reply

Ilga Pauser, TankTerminals.com We do make a difference between commercial and non-public storage companies. Among the commercial players in the Middle East the biggest (in terms of capacity) are Eilat Ashkelon Pipeline Co. Ltd., Horizon Terminals Ltd. together with Royal Vopak B.V., Oiltanking GmbH, VTTI B.V.; in Africa - Island View Storage Ltd., Oiltanking GmbH, Horizon Terminals Ltd., Afriquia SMDC and Addax & Oryx Group Ltd.

11 months ago | Reply

Ilga Pauser, TankTerminals.com As we are not a tank constructing company (TankTerminals.com is a database publishing company), we regret we are not in a position to give you an advice. Perhaps other readers of this forum can help you.

11 months ago | Reply

Paresh Shah In case you are working on project, you have to first make out the Tank terminal layout plan depending on land availability Tank size can be worked out further receipts & evacuation facilities required for cargo will decide the other facilities required to be created in terminal.
We are India based Group of Consultant & can help you to work to meet your requirements. contact India +919820059728.

11 months ago | Reply

View all 3 answers

Paresh Shah Dear Victor, what is the location you are referring to. are you looking for any Consultancy Firm to draw out Marketing plan for your project? I am from India & can assist on the same for any Asia Specific job. Contact India +919820059728

11 months ago | Reply

Carlos PEREIRA Hello Victor,

You question is quite general, and I fear that it would be difficult to provide a perfect answer in a few lines.
However, I will try to give some insights based on my personal experience

TANK UTILIZATION :
As you would imagine, in order to build such an indicator, you would need following information :
- Tank Capacity : Commercial and/or Technical depending on the destination of the indicator Customer and/or Internal Staff
- Movements concerning the Tank

STOCK MANAGEMENT :
Your stock management will be done based on following aspects :
- (Petroleum) Product Characteristics
- Tank Characteristics (including Strapping Tables)
- Calculation Method : in case you realize Tank Measurements you could probably use API (American Petroleum Institute) Tables

CONTROLS :
Your Tanks certainly have Safety margins and you can use this information to avoid overfilling.

MANUAL/AUTO STOCK MANAGEMENT AND RECORDING
If your Terminal has a high level of automation (tank radars guages, presets, PLC, ...) you should be confortable to implement AUTOMATIC Stock Management and Recording.
Anyway you would probably need a Terminal Management System to manage and follow movements, stocks, ...

Hopefully this summary will help you,

Best Regards

12 months ago | Reply

victor ohakim Dear Carlos PEREIRA,

Thank you for your support. I was hoping to get detailed insights like templates and calculations for the manual recording and reconciliation of daily operations at a petroleum depot warehousing Gasoline, Diesel and Kerosene (All of No.3 X 5,000MT Tank capacity each). Specific details and sample(scanned) documents and case studies will be highly appreciated.

I should be able to build my business case and track business activity and profitability using the templates. I hope this isn’t too much to ask.

Thank you for the support.

(info@earthoilgroup.com)

12 months ago | Reply

View all 4 answers

Rob Luijendijk As we are not a tank cleaning company (TankTerminals.com is a database publishing company), we regret we are not in a position to send you such procedures. Perhaps other readers of this forum can help you.

-15620691418 seconds ago | Reply

Scooter Wilson Tank cleaning procedures will depend on the previous content of the tank and the what the next content will be. There are several different cleaning methods that are acceptable, dependant of the product being removed.

  -65038899428 seconds ago via LinkedIn | Reply

View all 8 answers

Rob Luijendijk Dear Willie, "greenfield" is understood to refer to a project starting from scratch on the earmarked plot of land. Let us discuss this at your convenience. Please call me at +31-10-2310630. Have a nice weekend.
Rgards,
Rob Luijendijk

12 months ago | Reply

Rob Luijendijk Dear Maalool Hichem, we can assist you in solving the problem in two ways. We, through our mother company Downstream B.V., Rotterdam, can make available at your terminal a well experienced tank terminal operations expert who can review the actual situation at your terminal and who can advise you on the spot. We strongly prefer this over arranging a visit of you to a terminal with similar operations in e.g. somewhere in Europe. Please call the undersigned to discuss this matter at +31-10-2310640 at your convenience.
Regards,
Downstream B.V.
Rob luijendijk
MD

12 months ago | Reply

Carlos PEREIRA Hello, Please kindly find below some insights based on my personal experience :

3) I would say Yes. The throughput charges are dependent on the quantity of product handled in movements.

4) Indeed, this is a common practice in this industry to have throughputs as part of the commercial aspects of a contract. And of course, this is a matter of negotiation.

5) Again, this is a matter of negotiation. And of course, this cary vary between customers.

6) As these two items are commercial related, I would say Yes. And once again it depends on the negotiation of the contract between a customer and a storage terminal.

-152861907418 seconds ago | Reply

p 1) any Terminal with product in/out pumping facilities through dock line can provide Transshipment subject to local laws.
2) to my understanding except the quantum Bulk/Container & In/Out handling operation, there is no different procedure for Custom Clarence Or Outward movement of cargo.
3)Yes
4) Yes it is common to provide one throughput free (based on capacity hired). same is negotiable.
5) as above
6) yes, after all it is specific earning which operator look for from total contracted operation.
In case of any Consultancy/assistance you may contact me: paresh.shah@portlogisticsindia.com
Our website: portlogisticsindia.com

11 months ago | Reply

Rob Luijendijk Dear Kenneth Opurum,
Deviding the barrel-amount by the factor 6.2898 gives the cubic meter-amount. Take 10% more for safety reasons.

12 months ago | Reply

Rob Luijendijk Dear Ulasni Innocent Obiora, please note that it is impossible to provide a straightforward answer to your question. Many variables play a riole here, such as type of product, size of tank(s), cleaning procedure, required cleanliness, disposal costs, etc. We suggest you contact a professional cleaning company for further information.

12 months ago | Reply

Rob Luijendijk Dear Mrs Sharmin Islam,
Ref our telcon a couple of minutes ago, I have asked one of my colleagues to put together the numbers you are asking for. She will send you an email shortly. We will include Oceania. Please note that we will provide this information as a complimentary service to AkzoNobel.
Regards,
Rob Luijendijk

-11802243365 seconds ago | Reply

Rob Luijendijk Dear Tony Rogers, our website, www.tankterminals.com, offers the opportunity to submit enquiries to any terminal listed in our database. Please select the terminal (or more than one terminal) from the list of terminals per country or per port click on "Send enquiry to selected terminals" at the top of the list. The website will send your enquiry to any of the terminals selected.

12 months ago | Reply

Paresh Shah It depends on Tank foundation required like Sand pad/Piling etc., however you can safely take Tank cost @ US$200 per KL capacity. The land size again depend on Class of Cargo to be stored in case of Haz class you will need around 3 Hec area for 80000KL, for Safe cargo it will be less.

  12 months ago via LinkedIn | Reply

Shahid-ul Huq Dear Sir,

We have inquiry for EPC Contract for design, supply, erection/fabrication of different capacity HFO Storage Tank, Lube Oil Storage Tank, Sludge Tank, Water Tank, etc. for one medium sized power plant.

Please consult our website www.tmel.org to understand better about our business activities

If you are capable and interested in this business then please reply immediately.

We look forward to hear from you soon.

Kind regards,

Shahid-ul Huq
COO & Director Marketing
TM Engineering Ltd.
House No. 125, Road No. 1,
Block - Ka, Pisciculture Housing Society,
Shyamoli, Mohammadpur, Dhaka-1207,
Bangladesh.
Tel: 0088-02-8141676
Fax: 0088-02-8155837
E-mail: tmel@dhaka.net
Web: www.tmel.org

-211841744702 seconds ago | Reply

View all 3 answers

Shahid-ul Huq Dear Sir,

We have inquiry for EPC Contract for design, supply, erection/fabrication of different capacity HFO Storage Tank, Lube Oil Storage Tank, Sludge Tank, Water Tank, etc. for one medium sized power plant.

Please consult our website www.tmel.org to understand better about our business activities

If you are capable and interested in this business then please reply immediately.

We look forward to hear from you soon.

Kind regards,

Shahid-ul Huq
COO & Director Marketing
TM Engineering Ltd.
House No. 125, Road No. 1,
Block - Ka, Pisciculture Housing Society,
Shyamoli, Mohammadpur, Dhaka-1207,
Bangladesh.
Tel: 0088-02-8141676
Fax: 0088-02-8155837
E-mail: tmel@dhaka.net
Web: www.tmel.org

-212441360702 seconds ago | Reply

Sivaramakrishnan Sir,
Still Enquiry is open

5 months ago | Reply

Jon Watson Terminals storing bunker fuels often add value by blending. So, if they have 500cSt HFO and distillate fuels they can blend these to create any of the intermediate fuels.
This can be designed for splash/batch blending on the barge, or splash/batch or inline blending in the terminal.

  12 months ago via LinkedIn | Reply

Mark Levitski If I understood your 1) question correctly the added services among other “simple storage” things are: Water separation (bio fuels, jet fuel); Homogenysing (mixing, air injection etc.); Blending; Adding additives; Sluge control; Sampling services and quality control; Emission control/ reduction; Heating; Product filters.

  12 months ago via LinkedIn | Reply

View all 4 answers

Ilga Pauser, TankTerminal.com We regret to advise you that we are offhand not in a position to provide information on storage rates and as far as we know there is no publisher providing such information. The only magazine, to the best of our knowledge, that publishes generic information on rates for oil etc. in major oil hubs is the Petroleum Economist. Otherwise, it is the best to contact terminals directly for their rates and terms.

2 years ago | Reply

MChouaieb If you are interested to lease Petroleum products ( not crude) in our terminal contact me: mounir.chouaieb@horizon-terminals.com +212661541012
If you are just curious dont contact me pls.

12 months ago | Reply

View all 3 answers

Ilga Pauser, TankTerminal.com We regret to advise you that we are offhand not in a position to provide information on storage rates and as far as we know there is no publisher providing such information. The only magazine, to the best of our knowledge, that publishes generic information on rates for oil etc. in major oil hubs is the Petroleum Economist. Otherwise, it is the best to contact terminals directly for their rates and terms.
There are 12 operating Jebel Ali & Fujairah facilities listed in TankTerminals.com database. Credit Account allows you to search our database for the information needed. Once the Credit points are used up you can buy any additional number of points (€ 0.30/point) with a credit card.

2 years ago | Reply

Joost Dear Sachin,

I can bring you on contact with a reputed EPC company that does projects all over the world. Please contact me at joost.smits@systemsnavigator.com

Best regards,
Joost Smits

2 years ago | Reply

Paresh Shah We at Value Added Liquid Logistic Support Services (VALLSS) are group of professionals with Senior level Industry experience & can support you in your entire activities of Building Greenfield/modifying/Marketing of Bulk Liquid Terminal at Indian coast. In case we meet your requirements kindly contact at paresh.shah210@gmail.com

12 months ago | Reply

View all 4 answers

Anil Raheja Dia for a 40000m3 tank will reach around 53m in case there are restrictions on height of the tanks to say 20m.
In case there is no such restrictions in place dia can be reduced by increasing the height.

  -25561097525 seconds ago via LinkedIn | Reply

Rastislav Razus For 40.0000 m3 we have build a concrete tank with diameter of 48 meter and height of 22 m. Tank bottom, tanks walls and tank roof was build as a monolith, pre-stressed concrete with internal composite layer and vacuum indication system to continuously monitor the leakage.

  10 months ago via LinkedIn | Reply

Corey Rogers Generally a Manifold system is designed to be drained regularly. Therefore constant line fill is considered part of tank bottoms and manifold is considered a transaction when emptied/filled.
www.tfa.com.au

  2 years ago via LinkedIn | Reply

Johann Kohler Martin, at what stage would you drain a manifold system in a terminal? There are risks regarding a vapour space within lines that are not gas free. Are you referring to a line clearance or line displacement after a transfer?

  2 years ago via LinkedIn | Reply

View all 4 answers

Brian Savage We have provided centrifugal pump sets ( 3 pumps to system) for 3500 and 4200 gallons per minute. Connections/line configurations on board greatly influence flow rate. Tanks being served and associated dynamic discharge heads also influence varying flow rates. Thus we see 3 versus 2 pumps being used. We only work with viscosities less then 35 cts.

  2 years ago via LinkedIn | Reply

Keith Sharp If you are unloading from a road tanker, positive displacement pumps are preferred as they have a much greater capacity to handle air without vapour locking and cavitating.

  2 years ago via LinkedIn | Reply

View all 6 answers

Anon 1) it depends on the contract. $6.50/cbm seem to be more for petrochemical products. At that price range, it might be more for pure storage.

2) it depends. Most terminals will not allow it so as to maximise revenue. But it is possible as long as all parties agree. I believe Vopak is looking into this

3) Petroleum products usually use bigger tanks and thus the rates are usually cheaper. Operation-wise, most are similar. Mostly, it is a scale issue.

2 years ago | Reply

Corey Rogers 1) Agreements can be negotiated with many different charge out options. Commonly rates are structured to include - base price/m3 + throughput + shipping + payback for facility modifications (If required) + blending + drumming. Basically-you pay for your tank + labour + energy to service your needs as a customer. The rates get better the longer the contract & how good your negotiation skills are.

2) Tank sharing is generally allowed if customers agree and products are obviously of a similar grade. Very common on petroleum terminals. Not so much in chemical terminals due quality risks.

3) Essentially the terminals are very similar as noted above however, petroleum products are dirty compared to chemicals and have simpler handling processes. The price/m3 will be much lower in a petroleum terminal.

www.tfa.com.au

2 years ago | Reply

Ilga Pauser, TankTerminal.com Dear Peter, there are 6 Alberta province facilities listed in TankTerminals.com terminal database. You can make a Registration at our website and with that you create a so-called Credit Account (with 100 free credit points) which will allow you to search our database. Once the 100 points are used up you can buy any additional number of points (€ 0.30/point) with a credit card.

2 years ago | Reply

Ilga Pauser, TankTerminals.com There are 3 types of loading arms used to transfer liquid products to/from truck, rail or vessel transported tank. Top and bottom loading arms are used for land transport and marine loading arm is user for water transport. Top loading arm is used to load and unload road or rail tankers. Bottom loading arm is used only for unloading. Marine loading arm is used to load and unload a ship or barge.

2 years ago | Reply

Ilga Pauser, TankTerminals.com Dear Eric, TankTerminals.com terminal database provides data on crude and product terminals worldwide. Currently we have around 20 companies with around 30 terminals in Malaysia enlisted in the database. You can make a Registration at our website and with that you create a so-called Credit Account (with 100 free credit points) which will allow you to search our database. Once the 100 points are used up you can buy any additional number of points (€ 0.30/point) with a credit card.

2 years ago | Reply

Lewis Bates Lots of claims by newcomers that simply do not stack up, We have been in the business as leader since the early 1950's ( I have done 30 of those) and have knowledge and experience of all of the hydrocarbons and Veg Oils (& therefore Biofuels) stored in large storage tanks, I am happy to discuss specifics, you can reach me on lewis.bates@spx.com

  2 years ago via LinkedIn | Reply

Salim Bilawala Could any one let me know if a tank (MS) built in 2006 and ramined idle since can be reused after cleaning ? What would be the method of cleaning as it has accumulated rust inside.

  2 years ago via LinkedIn | Reply

View all 4 answers

Joost Smits Hi Lloyd,

CEPS has a number of access points (Rotterdam, Antwerp, Gent, Le Havre and Marseille). As far as I know, the following terminals have access to CEPS, although not in Germany:
- Oiltanking Stolthaven Antwerp
- Vopak Eurotank
- Vopak ACS
- LBC Antwerp
- Oiltanking Ghent

Best regards,
Joost Smits

-229450668608 seconds ago | Reply

Ilga Pauser, TankTerminals.com We regret to advise you that we are offhand not in a position to provide this information, which depends on region/country/port, and as far as we know there is no publisher providing such information. The only magazine, to the best of our knowledge, that publishes generic information on rates for oil etc. in major oil hubs is the Petroleum Economist.

2 years ago | Reply

Lewis Bates Gas I have no connection with, but it occurs to me that storage capacity and storage use are two different figures, if a terminal has 1 million CuM refilled every week is a much more important measure than the strategic storage tanks which are refilled maybe once per year, or even tanks that (these days) are too expensive to fill. Refineries are not good at indicating the usability of their tankage - Terminals are better - but not much.

  2 years ago via LinkedIn | Reply

Paresh Shah Based on India Industry experience you can safely take US$ 160 per CBM of Tank capacity(MOC-Mild Steel) to be build. Kindly note Dockline cost will be additional based on MOC & Length/Size/Number of the same.

  2 years ago via LinkedIn | Reply

Rob Luijendijk Dear Jonathan, as this question cannot be answered straightforwardly, we would appreciate discussing this matter with you directly. Please let us have your phone number.

2 years ago | Reply

Rob Luijendijk We regret to advise you that we are offhand not in a position to provide this information. However, we would appreciate getting in touch with you on this subject to better understand the reasons why you are looking for this.

-110922655626 seconds ago | Reply

FJ I stored bunker at Fujairah last year in October for a monthly rate of US5 per ton. Initial negotiations started at US¤ 9.

2 years ago | Reply

Rob Luijendijk Bij de beantwoording van deze vraag moet allereerst geografie van de markt gedefinieerd worden, bijv. Amsterdam-Rotterdam-Antwerpen (ARA), geheel Europa, andere continenten, gehele wereld. Om het dicht bij huis te houden, een paar opmerkingen over het ARA gebied. Gezien de enorme grootte van dit havengebied en het belang van deze havens voor de opslag en overslag van olie, chemie, etc. zijn belangrijke en grote spelers in de tankopslagmarkt in het ARA gebied nadrukkelijk aanwezig. De bedrijven spelen een prominente rol en trekken daardoor dan ook de aandacht. Echter, ook in het ARA gebied zijn eveneens vele andere grotere en kleinere bedrijven op dit terrein actief. Er is dus zeker geen sprake van een oligopolie in het ARA gebied en juist de laatste jaren zijn er nogal wat nieuwe spelers bijgekomen. Op Europese schaal met ca. 800 commerciele terminals, is dit nog minder het geval en op wereldschaal is er ondanks een aantaal grote en bekende wereldspelers, sprake van een sterk gefragmenteerde markt.

2 years ago | Reply

Rob Luijendijk Hi Hugh, this depends to a large extent on how you define "oil storage capacity". If you take the total global oil storage capacity (dedicated/refinery + independent), their share is small. However, probably your question refers to the independent tank storage industry only (= about 450/500 M m³, max 20% of the total), the share of the investment banks is larger because we think that their share in the dedicated/refinery storage industry is negligible. Still, for the independent tank storage industry, a distinction has to be made between "owned" and "leased" or both at the same time. With respect to "owned", another factor is owned directly or owned indirectly.
Probably because of these ambiguities it is very difficult to say what there share is. Two things are rather sure though: it is not insignificant and it is rising.

2 years ago | Reply

Rob Luijendijk Rik, happy that we could clarify things in our telcon yesterday.

2 years ago | Reply

Khalid Replys can be sent to my e-mail: khalid.zahrani.2@aramco.com or directly by calling me on +966504850778 (mobile).

2 years ago | Reply

Rob Luijendijk To learen more about the various ways to access our database, please visit www.tankterminals.com/about_us.php and refer to section 'Subscriptions'.

-61062684310 seconds ago | Reply

Rob Luijendijk We regret to advise you that we currently do not have an answer to this question. We will forward this question to our North American office. We will advise you once we know the capacity.

-39540876310 seconds ago | Reply

Rob Luijendijk There will be crude storage capacity where 1) crude is explored (found), 2) where there are refineries, and 3) in (big) ports for logistical reasons or trading purposes. This website and its database focus on independent tank storage, storage accessible for third parties. All crude storage prior to the refineries is rarely in the hands of independent operators, virtually always operated by the crude exploration companies and/or the well known oil companies. This is the reason why relarively little information is found in this database. It is not our focus as we are trying to put transparency in the tank storage market that can be used by third parties. Nevertheless, you will find in our database a number of crude storage facilities that offer their services, albeit often on a limited scale, for third party crude storage. You can make a Registration at our website. With that you create a so-called Credit Account (with 100 free credit points) which will allow you to search our database. Once the 100 points are used up you can buy any additional number of points (€ 0.25/point) with a credit card.

2 years ago | Reply

Rob Luijendijk Please note that we are not in the business of crude oil trading or the trading of any oil commodity for that matter. We only provide information on global crude and oil product terminals through this website, the largest if its kind in the world.

2 years ago | Reply

Aman Khan Vijah
Contct us via e-mail to: atco1915@live.com

-215565583937 seconds ago | Reply

Rob Luijendijk We estimate that the global tank storage capacity is around 1,800 million m³. Furthermore we estimate that as part of this total a maximum of 400 million m³ is capacity operated as independent/commercial tank storage capacity. Generally speaking, independent/commercial tank storage capacity is the capacity that is not operated by oil companies. Oil company's capacity is called dedicated storage capacity and is generally used for the relevant oil company only. Independent/commercial capacity is also referred to as third party storage capacity. Important to understand is that products stored at independent terminals is never owned by the owner/operator of the terminal, these products are always owned by third parties, the terminal's clients.

2 years ago | Reply

Rob Luijendijk We do not (cannot) provide the cost for making use of the services of any tank terminal listed in our database. That is the prerogative of the terminal owner/operator.

2 years ago | Reply

Rob Luijendijk Tank utilization can be measured in various ways; per m³ holding capacity of one or more tanks (filling rate), to the extent that the throughput capacity is used (x cubic meters or x tons in and out of a tank per period), or the financial perforemance in relation to a budget.

2 years ago | Reply

Corey Rogers One of my favourites was tank turns per year. That is total tank throughput divided by tank volume.
www.tfa.com.au

2 years ago | Reply

View all 3 answers

Maria Downstream

-48471439316 seconds ago | Reply

Rob Luijendijk Dear Ling Ling, the independent tank storage industry generaly serves the middle (assuming you mean here heavy fuel oil) and downstream (gasoline, gasoil, diesel, naptha) oil sectors (as well as chemicals, vegetable/edible oil, etc.). However, there are also independent tank terminal facilities that handle crude but this number is small relative to the other two sectors.

2 years ago | Reply

Rob Luijendijk Dear Arthur Chapman,

TankTerminals.com provides information about the (independent) tank terminal facilities around the globe. For Australia we have 32 facilities listed in our database. Per terminal we provide details re: physical/digital addresses, names and contact details of key officers, storage capacities, types of tanks, number of tanks, types of products handeled, accessibility, berth information, etc. Google Maps is fully integrated.

You can gain access to this database by making a Registration on our home page. The Credit Account which is obtained thru this registration is initially free of charge and without obligations.

Rob Luijendijk

2 years ago | Reply

Maria Eschbach As far as we know there is no publisher providing such information. The only magazine, to the best of our knowledge, that publishes generic information on rates for oil etc. in major oil hubs is the Petroleum Economist. The January issue of this magazine normally has an article on this matter.
Please see also the following postings in KB: Storage rates in South East Asia www.tankterminals.com and Storage rates in Rotterdam www.tankterminals.com

2 years ago | Reply

Rob Luijendijk Dear Chaitanya Andesara, you mention "tankers". If you refer to tankships, we regret to advise you that we do not have any expertise in that field. Where it concerns land tanks, we are happy to discuss matters with you.

2 years ago | Reply

Joost Smits Our website shows some challenges for oil terminals, mainly focused on the logistics of a terminal. This might give you an idea. However, we do not publish complete design documents.

URL: www.systemsnavigator.com

-40519183207 seconds ago | Reply

Maria Eschbach You can check it with Island View Storage Ltd. and Vopak in Durban.

2 years ago | Reply

Rob Luijendijk A standard contract form stipulates a fee per cubic meter per annum or another period. These fees normally include a number of throughputs during that same period. If this number of throughputs is exceeded an additional throughput fee applies. If the pre-agreed number of throughputs is not reached, the original fee agreed for this contract remains unchanged. Only excess throughputs are being charged extra. Please see also my answer to Tank Leasing Price question.

2 years ago | Reply

Rob Luijendijk Tank storage fees are based on supply and demand. In other words, a lot of demand in a tight market leads to high storage fees. Another approach is of course that storage fees are based on operational, financial, overhead costs for a terminal. The total cost (e.g. per annum) divided by the total storage capacity results in (minimum) storage fee per cubic meter per annum. Furthermore, it has to be taken into consideration that not all capacity will be leased out permanently, so a correction for an expected occupancy level applies as well.

2 years ago | Reply

Isah Joe Can you give me estimates or known price rates for leasing storage tanks per cubic meter

2 years ago | Reply

Rob Luijendijk a) Current capacity in i) Rotterdam – 8,2 mln m3; Amsterdam – 4,3 mln m3; Antwerp – 3,7 mln m3 and in ii) ARA – 16,1 mln m3. However, these capacities also include the storage of dirty fuel oil, which we estimate for Rotterdam at 40-50%; Amsterdam – 30-40%; Antwerp < 20%.
b) Planned capacity Rotterdam – 965K m3; Amsterdam – 770K m3; Antwerp – 963K m3 and ARA - 2,7 mln m3. Please note that this also potentially includes capacity for fuel oil, expectedly according to the percentages mentioned above.

2 years ago | Reply

Rob Luijendijk We are sorry to let you know that we are not familiar with the recent/current rates for storage of oil in VLCC's off the Malaysian coast.

2 years ago | Reply

Rob Luijendijk Edward, thanks for your positive feedback on our website.
Initially, the storage fee would be based on cost-based pricing, also taking occupancy levels into consideration. These calculated fees are then compared with existing fees in the relevant storage market or, if this is absent, estimated on the basis of a virtual supply/demand situation. This latter can also be achieved by discussions/negotiations with potential clients.

2 years ago | Reply

Cezz Thanks Krien,

Would you have any idea if this varies for crude oil, petrochemical products and fuel?

2 years ago | Reply

Stefan Dear Tsuma:

It is not an easy answer, and without conducting a study on the required facility, no one would be able to tell you with certainty. Even the price for one single tank can vary a lot i.e. what product would be stored, single or double walled, single or double shell, type of roof, are mixers inside, does it have to be heated, fire fighting equipment ... on top of that, you are mentioning jetty and a bitumen facility. Unless you spend some amount of money co conduct a study, you would not be able to put a budget on it. We are not talking about one single tank but a tank farm.

Hope it helps,
Stefan
www.petro

-166620760578 seconds ago | Reply

Rowland Dicks I agree with Stefan's comments and would like to add a few other dimensions to the discussion. The terrain would affect the total cost as well as the length of pipeline, whilst the size of tank that would meet the proposed client needs is needed to add to the costing protocols. I don't think that there is enough information supplied relating to the question to make any more comments.
Regards
Rowland

  2 years ago via LinkedIn | Reply

View all 5 answers

Rob Luijendijk, TankTerminals.com TankTerminals.com database includes all US terminals that have significance for international trade and transport. This also means that the smaller hinterland terminals that are used for distribution purposes are not included. All terminals for the US are listed on a state-by-state basis and could be searched as such. Through our map search terminals that are visible in a zoomed section of the map could be selected. All search results could be exported to an Excel summary. We believe that these functionalities fully meet your requirements. If you have any further questions, please contact us again.

-136325982896 seconds ago | Reply

Rob Luijendijk, TankTerminals.com Pure INDEPENDENT terminal operators do not sell or buy products. These companies only store products on behalf of third parties. These might be traders in oil products, but can also be producers and end users. However, there are also terminals that are owned by oil traders, but often these terminals are operated by a separate subsidiary. The focus of TankTerminals.com are the independent storage providers.

-144404642096 seconds ago | Reply

Maria Eschbach of TankTerminals.com The Bakken terminals are serving the oil fields in the region and are not listed in our database as they can not be qualified as independent terminals. For pricing indication you need to approach those terminals directly.

-155481122095 seconds ago | Reply

Shahid-ul Huq Dear Sir,

We have inquiry for EPC Contract for design, supply, erection/fabrication of different capacity HFO Storage Tank, Lube Oil Storage Tank, Sludge Tank, Water Tank, etc. for one medium sized power plant.

Please consult our website www.tmel.org to understand better about our business activities

If you are capable and interested in this business then please reply immediately.

We look forward to hear from you soon.

Kind regards,

Shahid-ul Huq
COO & Director Marketing
TM Engineering Ltd.
House No. 125, Road No. 1,
Block - Ka, Pisciculture Housing Society,
Shyamoli, Mohammadpur, Dhaka-1207,
Bangladesh.
Tel: 0088-02-8141676
Fax: 0088-02-8155837
E-mail: tmel@dhaka.net
Web: www.tmel.org

-223801837501 seconds ago | Reply

Maria Eschbach TankTerminals.com terminal database provides data on crude and product terminals worldwide. You can register and use 100 free credits to see what it offers. However, the database doesn't specify if the terminal has blending capabilities. I wouldn't know of any other source that would do. I have checked OPIS (www.opisnet.com but it seems they don't list it, too.

2 years ago | Reply

Rob Luijendijk Dear Jerry, PortStorage Group is not engaged in this type of business. However, what springs to our mind is that you could be contacting real estate agents in the US. We understand that there are agents that are specialised in tank terminals in general, perhaps also in asphalt terminals. Success.

2 years ago | Reply

Denis Elis Thanks you.

-165263762050 seconds ago | Reply

View all 5 answers

Rob Luijendijk Possible but not necessarily easy. Moreover, a tank container stores about 25/30 m³ which is often not enough for bulk quantities. Important is to clean the tank container to safeguard the integrity of the next product. What plays a role as well is the the type of authorosation of the tank container to carry products with different hazardous properties. Tank containers (like rail tank cars or tank trucks) are used for intermediate storage but usually not for a prolonged period. For bulk storage of liquid storage the services of a tank terminal, some of which have small tanks as well, are the best and safest solution.

2 years ago | Reply

Mike van Croonenburg There is no average price for the purchase of existing storage facility. For new build there are average numbers where you can calculate with. We are specialists in purhasing existing storage for clients. Discretion and confidentiality is guaranteed. Please contact me for further information and our possibilities.

Mike van Croonenburg
Tel: +31 6 54 722 909
mike@petrolstoragebroker.eu
www.petrolstoragebroker.com

2 years ago | Reply

Allen Minitzer work basis 150mt/hour for parcels of 5kt, a little higher for bigger parcels, pretty low compared to CPP.

2 years ago | Reply

Zaid Mohamad most of Chemical terminals are using 6\\\" pipes and then max. loading rate expected is 200mt/h but as Allen said the average is normally 150mt/h ( depends on the ship size below 10k or above), but still for some viscous chemicals like POLYOL and similar products the average rate could be around 100mt/h.

2 years ago | Reply

View all 5 answers

Paul Verwater We can assist you in many ways. Engineering,
Procurement all the way up to execution. For references please contact our website ad
www.verwater.com

-207108318419 seconds ago | Reply

Aad Bijl Vicoma Engineering is able to help you with the design of your project. Please contact me at: aad.bijl@vicoma.nl

-211841742419 seconds ago | Reply

View all 5 answers

Feiko Jager Dear John, Rob gave a concise answer to your question. In case you would like to go more in depth, I could help you with my terminal automation experience from Vopak. Please have a look at www.fjjagerconsultancy.nl if this interests you.

2 years ago | Reply

View all 3 answers

Allen Minitzer For what period?

441 years ago | Reply

View all 3 answers

Feiko Jager There are many developments in terminalling, as in most industries. I suggest that you prescribe to tank storage magazine as it will keep you up to date about the latest from the industry.

3 years ago | Reply

View all 3 answers

Hans Vrijenhoef I agree with your sense towards independancy and strategic interest by producers/traders of big bulk products like crude/ fuels etc.
I also sense a trend towards decentralised smalle scale production asking as well for more storage, but rather smaller sized. so for me, independancy and decentralised are key words in the near future.

3 years ago | Reply

View all 7 answers

Emmanuel Polman Importance in the business model is the risk sharing strategy between the private operator and the port authority. The port / terminal institutional model will determine the mutual level of involvement in investments in the land & nautical infrastructure, super structures, tools & equipments, operations, etc. It will determine the financing structure, sources of financing and the future operational expenses etc.
I would be happy to elaborate if you wish.
Please visit my personal page for background:
nl.linkedin.com

skype: emmanpolman
email: emmanuel@resourcement.biz

3 years ago | Reply

View all 5 answers

Brad Yokogawa can provide their award winning VISAOM solution. This is a complete Oil movements management, monitoring and stock tracking system that can integrate will all level transmitters.
The solution also include online mass balancing functionality to assist in identifing either data in accuracies or operational errors such as what occured at the Buncefield terminal.

As with any Yokogawa product it is supported by our global network of support and engineering centers and can provide 24/7 support services.

www.yokogawa.com

2 years ago | Reply

Nigel Richardson TesTex NDT are the UKs leading storage Tank Inspection company. We can give you advise on Tank Inspection to EEMUA159 and AIP653. If needed we would be able to offer you a complete Inspection service.

Please contact me for more details.
nigel.richardson@testexndt.co.uk

2 years ago | Reply

Jon Watson The DM 250.2 portable digital density transmitter may prove a useful tool.
This is simply a vibating element density meter fitted at the end of a measuring tape. The operator can then lower this into the tank and capture density and temperature data (and convert automatically to density at 15C) at different depths. The tape extension, temperature, observed and base densities are then logged and can be transferred by Bluetooth to a portable (with belt clip) data logger and subsequently via bluetooth to a PC.
Typical density accuracy is 0.5kg/m3.
This one instrument can be used with a variety of different tanks and different tank conents. Where a density difference is found indicating an interface wetween the two levels at which readings were taken, the operator can then take further readings at intermediate levels to idenify the interface, typically to within 10cm.
The instrument is popular with operators who routinely have to otherwise take top middle and bottom samples and measure with a hydrometer as they have less equipment to carry round and say that it is safer when climbing tanks when less encumbered.
www.viscoanalyser.com

2 years ago | Reply